HP BladeSystem bc2200 Command Line Interface Reference Guide HP BladeSystem PC - Page 195

14 Management ACL Commands management access-list The management access-list Global Configuration mode command configures a management access list and enters the Management Access-list Configuration command mode. To delete an access list, use the no form of this command. Syntax management access-list name no management access-list name Parameters n name - Access list name. (Range: 1-32 characters) Default Setting This command has no default configuration. Command Mode Global Configuration mode Command Usage Use this command to configure a management access list. The command enters the Access-list Configuration mode, where permit and deny access rules are defined using the permit (Management) and deny (Management) commands. If no match criteria are defined, the default is deny. If you reenter an access list context, the new rules are entered at the end of the access list. Use the management access-class command to select the active access list. The active management list cannot be updated or removed. Management ACL requires a valid management interface, which is a port, VLAN, or port-channel with an IP address or console interface. Management ACL only restricts access to the device for management configuration or viewing. HP PC Blade Switch CLI Reference Guide www.hp.com 14-1