HP BladeSystem bc2200 Command Line Interface Reference Guide HP BladeSystem PC - Page 211
channel-group
![]() |
View all HP BladeSystem bc2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Port Channel Commands channel-group The channel-group Interface Configuration (Ethernet) mode command associates a port with a port-channel. To remove a port from a port-channel, use the no form of this command. Syntax channel-group port-channel-number mode {on | auto} no channel-group Parameters n port-channel_number - Specifies the ID of the valid port-channel for the current port to join. n on - Forces the port to join a channel without an LACP operation. n auto - Allows the port to join a channel as a result of an LACP operation. Default Setting The port is not assigned to a port-channel. Command Mode Interface Configuration (Ethernet) mode Command Usage There are no user guidelines for this command. Example The following command forces port e45 to join port-channel 1 without an LACP operation. Console(config)# interface ethernet e45 Console(config-if)# channel-group 1 mode on HP PC Blade Switch CLI Reference Guide www.hp.com 16-3
![](/manual_guide/products/hewlettpackard-bladesystem-bc2000-command-line-interface-reference-guide-hp-bladesystem-pc-blade-switch-07763e1/211.png)