HP BladeSystem bc2200 Command Line Interface Reference Guide HP BladeSystem PC - Page 302
spanning-tree priority, The default bridge priority for IEEE Spanning Tree Protocol STP is 32768.
![]() |
View all HP BladeSystem bc2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
Spanning-Tree Commands spanning-tree priority The spanning-tree priority Global Configuration mode command configures the spanning tree priority of the device. The priority value is used to determine which bridge is elected as the root bridge. To return to the default configuration, use the no form of this command. Syntax spanning-tree priority priority no spanning-tree priority Parameters n priority - Priority of the bridge. (Range: 0-61440 in steps of 4096) Default Setting The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768. Command Modes Global Configuration mode Command Usage The bridge with the lowest priority is elected as the root bridge. Example The following command configures spanning tree priority to 12288. Console(config)# spanning-tree priority 12288 22-6 www.hp.com HP PC Blade Switch CLI Reference Guide
![](/manual_guide/products/hewlettpackard-bladesystem-bc2000-command-line-interface-reference-guide-hp-bladesystem-pc-blade-switch-07763e1/302.png)