HP BladeSystem bc2200 HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 34
SNMP Configuration, Network Configuration Field Descriptions - Network Area
View all HP BladeSystem bc2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Table 4-8 Network Configuration Field Descriptions - Protocols Area (continued) SNMP Enabled or Disabled. The default setting is Enabled. Secure Shell Enabled or Disabled. The default setting is Enabled. Telnet Enabled or Disabled. The default setting is Enabled. Table 4-9 Network Configuration Field Descriptions - Network Area Field Possible Values Description Network Area DHCP Gets the IP address of the Integrated Administrator from the DHCP. Static IP Sets a static IP address of the Integrated Administrator. Dynamic DNS Determines whether the Integrated Administrator uses Dynamic DNS. IP Address where ### ranges from 0 to 255. Static IP address for the Integrated Administrator (mandatory if Static IP is selected). Subnet Mask where ### ranges from 0 to 255. Subnet mask for the Integrated Administrator (mandatory if Static IP is selected). Gateway Address where ### ranges from 0 to 255. Gateway address for the Integrated Administrator (optional field if Static IP is selected). DNS Server 1 where ### ranges from 0 to 255. The IP address for the primary DNS server (optional field if Static IP is selected). DNS Server 2 where ### ranges from 0 to 255. The IP address for the secondary DNS server (optional field if Static IP is selected). SNMP Configuration The SNMP Configuration screen (shown below) enables an enclosure administrator to modify the SNMP settings of an enclosure. These settings are specific to the enclosure and do not affect the network configurations for blade PCs. Two buttons appear at the bottom of this screen: ● Apply - Saves changes made to the screen. ● Cancel - Restores all fields on the screen to their original values. 26 Chapter 4 Web Browser Interface ENWW