HP BladeSystem bc2200 HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 73
Functions Exclusive to the Command Line Interface - Enclosure Management Commands, continued
View all HP BladeSystem bc2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table 5-9 Functions Exclusive to the Command Line Interface - Enclosure Management Commands (continued) (measured in Hertz), part number, serial number, and hardware number, and hardware revision for the specified power supply if one is specified or for revision. all power supplies if ALL is given. SHOW ENCLOSURE STATUS Under an enclosure status heading, this command displays the The command line adds the health of the enclosure, Integrated Administrator health, and Integrated Administrator unit identification LED. health. Under a power status heading, this command displays the power status and capacity. UPDATE IMAGE Downloads a new image from a server over the network and All uses the image to update the firmware of the enclosure. UPLOAD CONFIG Uploads the current runtime configuration to the specified FTP All or TFTP server. CLEAR SESSION BAY Terminates a Terminal session from the enclosure. All CLEAR BAY BOOT [FIRST | ONCE] [ALL | }] Clears the setting for the IPL to be passed to the blade at the next reboot. The "FIRST" argument resets the IPL for all subsequent reboots. The "ONCE" argument resets the IPL for the next reboot only. This command is only valid for present blades. Only enclosure and group administrators may execute this command. This command may require a firmware upgrade for the BIOS ROM of certain HP blade PCs. GENERATE NMI POWERON BAY } {[PXE | HDD | RBSU]} Powers on the specified blade PC. If no blade PC is in the specified bay, the user is told that the bay is empty. Allows for optional boot argument The optional boot arguments may require a firmware upgrade for the BIOS ROM of certain HP blade PCs. Adding an optional boot argument forces the blade to abandon the regular boot order and forces a boot using the specified method. REBOOT BAY } {FORCE} {[PXE | HDD | RBSU]} Sends a request to the blade PC to perform a graceful shutdown. The blade PC is then powered on. If no blade PC is in the specified bay, the user is told that the bay is empty. Allows for optional boot argument The optional boot arguments may require a firmware upgrade for the BIOS ROM of certain HP blade PCs. Adding an optional boot argument with force the blade to abandon the regular boot order and force a boot using the specified method. SET BAY BOOT FIRST [HDD | PXE] } Sets the IPL for each subsequent reboot. This setting is only valid for present blades and is cleared if a blade is removed. This command may require a firmware upgrade of the BIOS. Only enclosure administrators may execute this command SET BAY BOOT ONCE [HDD | PXE | RBSU] } Sets the boot device to be used on the next boot of the bay(s) Only enclosure administrators specified. This setting is only valid on present blades and is may execute this command. cleared if the blade is removed. ENWW Functionality Exclusive to the Command Line Interface 65