HP Brio 85xx hp brio 85xx, online reference guide - Page 57

Press <F2> to enter SETUP, to view the error and take any

Get HP Brio 85xx PDF manuals and user guides View all HP Brio 85xx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

3 Upgrading and Adding Accessories 6 Turn on the display, and then turn on the computer. 7 In Windows, check that the new hard disk drive has been recognized. To do this, double-click the My Computer icon on the desktop, the disk drives that are available on your computer are displayed in the My Computer window. Before you can use the new hard disk drive, you will probably need to set up partitions and then format the drive. To do this, restart your computer in MS-DOS mode, run fdisk to set up the partitions, restart the computer, and then format the new drive from within Windows. If the new drive is not recognized, you may need to run the Setup program: restart the computer and press when Press to enter SETUP is displayed at the bottom of the screen. If you have any doubts about using the HP Setup program, contact your reseller for help. If the new drive is still not recognized, check that you have correctly followed the installation procedure described above. If there are any errors reported during the computer's startup routine, press to view the error and take any necessary action. If you cannot start your computer properly, remove the drive and try starting your computer again. If the computer now starts without any problems, there may be a problem with the new drive. If you experience any other problems as a result of the upgrade, and your computer is supplied with the HP Brio Center, refer to the support tools for further assistance.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
3
Upgrading and Adding Accessories
6
Turn on the display, and then turn on the computer.
7
In Windows, check that the new hard disk drive has been recognized. To do this, double-click the My Computer icon on
the desktop, the disk drives that are available on your computer are displayed in the My Computer window.
Before you can use the new hard disk drive, you will probably need to set up partitions and then format the drive. To
do this, restart your computer in MS-DOS mode, run
fdisk
to set up the partitions, restart the computer, and then
format the new drive from within Windows.
If the new drive is not recognized, you may need to run the
Setup
program: restart the computer and press
when
Press <F2> to enter SETUP
is displayed at the bottom of the screen. If you have any doubts about using the HP
Setup
program, contact your reseller for help.
If the new drive is still not recognized, check that you have correctly followed the installation procedure described
above.
If there are any errors reported during the computer’s startup routine, press
to view the error and take any
necessary action.
If you cannot start your computer properly, remove the drive and try starting your computer again. If the computer
now starts without any problems, there may be a problem with the new drive.
If you experience any other problems as a result of the upgrade, and your computer is supplied with the HP Brio Center,
refer to the support tools for further assistance.