HP Brocade 8/12c Brocade Fabric OS Documentation Updates - Supporting Fabric O - Page 53

Brocade DCX 8510-8 Backbone Hardware Reference Manual, In - brocade 8510 hardware reference manual

Get HP Brocade 8/12c PDF manuals and user guides View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Chapter 16 Brocade DCX 8510-8 Backbone Hardware Reference Manual In this chapter The updates in this chapter are for various hardware manuals. •Chapter 5, Removal and Replacement Procedures 43 Chapter 5, Removal and Replacement Procedures All of the following occurs under the heading "WWN card removal and replacement." Under the subheading "Determining the status of a WWN card" on page 87, replace the information in Table 12 in the Sample error message column for the WWN unit is being faulted row with the following information: Type of message WWN unit is being faulted. Sample error message 0x24c (fabos): Switch: switchname, Critical EM-WWN_UNKNOWN, 1, Unknown WWN #2 is being faulted or 2010/09/16-13:44:21, [EM-1003], 40, SLOT 7 | FFDC | CHASSIS, CRITICAL, Brocade_DCX, WWN 2 has unknown hardware identifier: FRU faulted Before the subheading "Removing the WWN card and WWN bezel (logo plate)" on page 88, add the following section: Preparing for the WWN card replacement If the WWN card requires replacement, complete the following steps. ATTENTION Follow ESD precautions (see "ESD Precautions" in your chassis manual). 1. Open a Telnet session to the chassis and log in to the active CP as admin. The default password is "password". 2. Verify that you are logged into the active CP. Run the haShow command to determine the active CP. 3. Run the supportsave command on the active CP to capture all settings. Fabric OS Documentation Updates 43 53-1002165-05

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Fabric OS Documentation Updates
43
53-1002165-05
Chapter
16
Brocade DCX 8510-8 Backbone Hardware Reference
Manual
In this chapter
The updates in this chapter are for various hardware manuals.
•
Chapter 5, Removal and Replacement Procedures . . . . . . . . . . . . . . . . . . .
43
Chapter 5, Removal and Replacement Procedures
All of the following occurs under the heading “WWN card removal and replacement.”
Under the subheading “Determining the status of a WWN card” on page 87, replace the
information in Table 12 in the Sample error message column for the WWN unit is being faulted row
with the following information:
Before the subheading “Removing the WWN card and WWN bezel (logo plate)” on page 88, add the
following section:
Preparing for the WWN card replacement
If the WWN card requires replacement, complete the following steps.
ATTENTION
Follow ESD precautions (see “ESD Precautions” in your chassis manual).
1.
Open a Telnet session to the chassis and log in to the active CP as admin. The default
password is “password”.
2.
Verify that you are logged into the active CP. Run the
haShow
command to determine the active
CP.
3.
Run the supportsave command on the active CP to capture all settings.
Type of message
Sample error message
WWN unit is being faulted.
0x24c (fabos): Switch: switchname, Critical
EM-WWN_UNKNOWN, 1, Unknown WWN #2 is being
faulted
or
2010/09/16-13:44:21, [EM-1003], 40, SLOT 7 | FFDC
| CHASSIS, CRITICAL, Brocade_DCX, WWN 2 has
unknown hardware identifier: FRU faulted