HP Brocade 8/12c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 262

2 fabPortShow Note 0x00000800 Zoning has completed 0x00001000 Segmented by Platform Management 0x00002000 Segmented due to no license 0x00004000 Segmented due to E_Port disabling 0x00008000 DIA already sent for that port 0x00010000 RDI already sent 0x00020000 Port is true T port 0x00040000 Port received an ELP 0x00080000 Port received an ELP RJT 0x00100000 LR pending due to ELP RJT rcv 0x00200000 Received a DIA on this port 0x00400000 Port is the EMT Initiator 0x00800000 Security violation 0x01000000 Security incompatibility 0x02000000 Rcv a DIA ACC 0x040000000 Port is security authenticating 0x080000000 ECP RJT or retires exceeded 0x100000000 Segmented due to duplicated WWN 0x200000000 Segmented due to E_Port isolation 0x40000000 ELP complete on loopback port 0x80000000 Logical E_Port corresponding to physical EX_PPort nbrWWN Neighboring switch WWN nbrPort Neighboring switch port lr_tid Link reset timer identifier and current state flow_control The flow control mode of the link. nghbr_escF Lists info exchanged by the neighbor switch in ESC (link level protocol). Values for etiz_state can be as follows: -1 Unknown ETIZ state 2 ETIZ capable but not configured 3 ETIZ capable and configured red_ports All E_Ports that are connected to the same neighboring switch The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. 230 Fabric OS Command Reference 53-1001764-01