HP Brocade 8/12c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 381

fmConfig 2 --addmonitor frame_type -port port_list [-nosave] [-force] Installs an existing frame monitor on the specified ports. Specify -nosave to save the configuration is nonpersistently. Use -force for first-time execution without confirmation. --delmonitor frame_type -port port_list [-nosave] [-force] Removes an existing frame monitor from the specified ports. Specify -nosave to save the configuration is nonpersistently. Use -force for first-time execution without confirmation. --delete frame_type Deletes an existing frame type. This command removes the entire configuration, including configured threshold and associated actions. It also removes any frame monitors of the specified type from all ports. This operand is not valid with predefined frame types. --clear frame_type -port port_list Clears the ports on which the specified frame type is monitored from the persistent configuration. --show frame_type Displays the specified frame type configuration. When used without operand, the --show command displays the configured frame types along with their bit patterns. The following operands are optional: Displays the following information for the specified frame type: Port number, Frame type, frame count, configured high threshold, configured alerts. time base and configuration status (saved or N/A). . This operand is optional; if omitted, this command lists all configured frame types on the switch along with their bit patterns. The following operands are exclusive. -force -port port_list Executes display without confirmation (First-time use only). Specifies the ports for which to display the frame type configurations. Refer to the description above for valid values. all Displays information for all ports and frame types. --help Displays the command usage. Examples To create a custom frame type using default thresholds and report actions (This custom frame monitor checks all incoming frames at offset 17, applies a mask of 0x0FF to the byte, and looks for a matching value of 0x07. It also monitors the incoming frames at offset 7, applies a mask of 0x0FF to the byte, and looks for matching values of 0x4F or 0x01. The counter is incremented when the monitor detects a frame where byte 17 is 0x07, and byte 7 is 0x4F or 0x01. The thresholds, alerting mechanism , action and threshold level for this custom frame type will be imported from a generic filter monitor configuration.): switch:admin>fmConfig --create MyFrameMonitor -pat "17,0x0FF,0x07;7,0x0FF,0x4F,0x01" To add E-mail alerts to the previously created frame type: switch:admin> fmconfig --change MyFrameMonitor -action email To install a SCSI frame monitor on ports 3-12: switch:admin> fmconfig --addmonitor SCSI -port 3-12 To save the port configuration persistently: switch:admin> fmconfig --save SCSI Fabric OS Command Reference 349 53-1001764-01