HP Brocade 8/12c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 361

fipsCfg 2 Bootprom access is enabled. FIPS mode cannot be configured at this time To enable FIPS after prerequisites have been met: switch:admin> fipscfg --enable fips You are enabling FIPS. Do you want to continue? (yes, y, no, n) [no] : yes FIPS mode has been set to : Enabled Please reboot the system switch:admin> fipscfg --show FIPS mode is : Enabled To back out of a zeroizing operation: switch:admin> fipscfg --zeroize You are Zeroizing FIPS configuration. Do you want to continue? (yes, y, no, n) [no]: no Operation cancelled. switch:admin> fipscfg --zeroize You are Zeroizing FIPS configuration. Do you want to continue? (yes, y, no, n) [no]: yes Executing 'secauthsecret --remove --all': This command deletes database of DH-CHAP secret keys. If a fabric requires authentication, deleting this database may cause switch to segment from the fabric. Do want to remove secret key database? (yes, y, no, n): [no] Operation cancelled... Executing 'pkiremove': WARNING!!! Removing pki objects will impair the security functionality of this fibre channel switch. If you want secure mode enabled, you will need to get the switch certificate again. About to remove Pki objects. ARE YOU SURE (yes, y, no, n): [no] Operation cancelled. Executing 'passwddefault': Password policies are already set to default. All account passwords have been successfully set to factory default. Executing 'seccertutil delkey': Deleting the key pair will automatically do the following: 1. Delete all existing CSRs. 2. Delete all existing certificates. 3. Reset the certificate filename to none. 4. Disable secure protocols. Continue (yes, y, no, n): [no] Operation cancelled. Fabric OS Command Reference 329 53-1001764-01