HP Business Inkjet 1100 HP Business Inkjet 1100 - User Guide - Page 43

Printing on custom-size media, To print transparencies Mac OS X, To load custom-size media

Get HP Business Inkjet 1100 PDF manuals and user guides View all HP Business Inkjet 1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Note To print transparencies (Mac OS X) 1 On the File menu, click Page Setup. 2 In the Paper Size pull-down menu, select size, change any other settings, and click OK. 3 On the File menu, click Print. 4 On the Paper Type/Quality panel, select the Paper tab. 5 In the Paper type pull-down menu, select the transparency type you are using. 6 Still on the Paper tab, select Best. Use Best mode to print transparencies. This mode provides a longer drying time and ensures that the ink dries completely before the next page exits the printer. 7 Change any other print settings if necessary, and then click OK. 8 Remove each sheet of media as it prints and set aside to dry. Allowing wet media to stack up might cause smearing. CAUTION ENWW Printing on custom-size media You can print custom-size media from Tray 1. When you want to print on custom-size media, you need to adjust the length and width guides in the tray, and, if necessary, extend the tray size to accommodate larger media. z Use Tray 1 when printing on paper that is 3 to 8.5 inches wide and 5 to 14 inches long (76.2 to 216 mm wide and 127 to 356 mm long). z If your application supports custom-size media, set the media size in the application before creating and printing the document. If your application does not support custom size media, set the size in the printer driver, create the document, and then print it. (You might need to reformat existing documents to print them correctly on custom paper sizes.) For information about extending the tray size, see "Loading media". To load custom-size media 1 Raise the output tray and remove all media from Tray 1. 2 Insert the custom-size media into the tray. 3 Slide the width and length guides until they stop at the edges of the media. The guides should be snug against the media without bending it. Sliding the guides too tightly against the media can cause jams. 4 Lower the output tray. To print custom-size media (Windows) 1 On the File menu, click Print, and then click Properties. (The actual steps can vary; this is the most common method.) 2 On the Paper/Quality tab, select the media type from the Type is box. 3 Click the Custom button under the Size is box. 4 Enter the dimensions of the paper in the Custom Paper Size dialog box, and then click OK. 5 Change any other print settings, if necessary, and then click OK. 6 Send your job to print. 2-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
ENWW
2-19
To print transparencies (Mac OS X)
1
On the
File
menu, click
Page Setup
.
2
In the
Paper Size
pull-down menu, select size, change any other settings, and click
OK
.
3
On the
File
menu, click
Print
.
4
On the
Paper Type/Quality
panel, select the
Paper
tab.
5
In the
Paper type
pull-down menu, select the transparency type you are using.
6
Still on the
Paper
tab, select
Best
.
Note
Use Best mode to print transparencies. This mode provides a longer drying time and ensures
that the ink dries completely before the next page exits the printer.
7
Change any other print settings if necessary, and then click
OK
.
8
Remove each sheet of media as it prints and set aside to dry. Allowing wet media to stack
up might cause smearing.
Printing on custom-size media
You can print custom-size media from Tray 1. When you want to print on custom-size media,
you need to adjust the length and width guides in the tray, and, if necessary, extend the tray
size to accommodate larger media.
Use Tray 1 when printing on paper that is 3 to 8.5 inches wide and 5 to 14 inches long
(76.2 to 216 mm wide and 127 to 356 mm long).
If your application supports custom-size media, set the media size in the application
before creating and printing the document. If your application does not support custom
size media, set the size in the printer driver, create the document, and then print it. (You
might need to reformat existing documents to print them correctly on custom paper sizes.)
For information about extending the tray size, see
“Loading media”
.
To load custom-size media
1
Raise the output tray and remove all media from Tray 1.
2
Insert the custom-size media into the tray.
3
Slide the width and length guides until they stop at the edges of the media. The guides
should be snug against the media without bending it.
CAUTION
Sliding the guides too tightly against the media can cause jams.
4
Lower the output tray.
To print custom-size media (Windows)
1
On the
File
menu, click
Print
, and then click
Properties
. (The actual steps can vary; this
is the most common method.)
2
On the
Paper/Quality
tab, select
the media type from the
Type is
box.
3
Click the
Custom
button under the
Size is
box.
4
Enter the dimensions of the paper in the
Custom Paper Size
dialog box, and then click
OK.
5
Change any other print settings, if necessary, and then click
OK
.
6
Send your job to print.