HP CB536A User Guide - Page 151
Control-panel display problems, Clear jams, Causes of jams
![]() |
View all HP CB536A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Control-panel display problems CAUTION: Static electricity can cause unexpected black lines or dots to appear on the product controlpanel display. Do not touch the product control-panel display if there is a chance that you have collected a static electric charge (for example, by walking on carpet in a low-humidity environment). Unexpected lines or dots might appear on the product control-panel display, or the display might become blank if the product is exposed to an electric or magnetic field. To resolve this problem, perform the following procedure: 1. Turn the product off. 2. Remove the product from the electric or magnetic field. 3. Turn the product on again. Clear jams Causes of jams Occasionally, paper or other print media can become jammed during a print job. Some causes include the following events: ● The input trays are loaded improperly or overfilled, or the media guides are not set properly. ● Media is added to or removed from an input tray during a print job or an input tray is removed from the product during a print job. ● The cartridge door is opened during a print job. ● Too many sheets have accumulated in an output area, or sheets are blocking an output area. ● The print media that is being used does not meet HP specifications. See Paper and print media on page 35. ● The media is damaged or has foreign objects attached to it, such as staples or paper clips. ● The environment in which the print media was stored is too humid or too dry. See Paper and print media on page 35. ENWW Control-panel display problems 141
![](/manual_guide/products/hewlettpackard-m1319f-user-guide-2811717/151.png)