HP CM3530 HP Color LaserJet CM3530 MFP Series - Analog Fax Accessory 500 Fax G - Page 33
Set the error correction mode, to open the setup settings menu and then touch
UPC - 884420196501
View all HP CM3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Set the error correction mode Normally, the fax accessory monitors the signals on the telephone line while it is sending or receiving a fax. If the fax accessory detects an error during the transmission and the error correction setting is on, the fax accessory can request that the error portion of the fax be sent again. You should turn off error correction only if you are having trouble sending or receiving a fax and if you are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection. 1. On the control panel, scroll to and touch the Administration icon to open the Administration menu. 2. Touch Initial Setup to open the setup settings menu and then touch Fax Setup. 3. Touch Fax Send Settings to see the settings. 4. Touch Error Correction Mode to see the settings. 5. Touch Enabled (default) to enable error correction mode, or touch Disabled to disable correction mode. ENWW Set the error correction mode 25