HP CM8000 Practical IPsec Deployment for Printing and Imaging Devices - Page 95
select These IP
View all HP CM8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Assume Endpoint is the local computer. Select "Any IP address". Then select "These IP addresses" for Endpoint 2 and click "Add..." Specify the address of the Jetdirect device. Click "OK". NOTE: This endpoint needs to be an IPv4 address. An IPv6 address can only be used when Microsoft Vista is updated to Service Pack 1 or later. It is highly recommended that all the IP addresses on HP Jetdirect be entered in this dialog. 95
95
Assume
Endpoint
is the
local computer.
Select “Any IP
address”.
Then
select “These IP
addresses” for
Endpoint 2 and
click “Add…”
Specify the address
of the Jetdirect
device. Click “OK”.
NOTE: This
endpoint needs to
be an IPv4
address.
An IPv6
address can only
be used when
Microsoft Vista is
updated to Service
Pack 1 or later.
It
is highly
recommended that
all the IP addresses
on HP Jetdirect be
entered in this
dialog.