HP Color LaserJet 2700 HP Color LaserJet 2700 - User Guide - Page 99
Control-panel messages, to printing and the auto-continue feature is - fuser
View all HP Color LaserJet 2700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Control-panel messages The control-panel messages indicate the current printer status. In addition, alert, warning, and critical error messages indicate situations that might require action. Alert and warning messages appear temporarily and might require that you acknowledge the message by pressing OK to resume printing or by pressing X to cancel the job. With certain warnings, the job might not finish printing or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the printer will attempt to resume printing the job after the warning has appeared for 10 seconds without acknowledgement. Critical error messages can indicate some kind of failure. Restarting the printer might fix the problem. If a critical error persists, the printer might require service. Control-panel message 10.XXXX Supply Error 49 Error Turn off then on 50.X Fuser Error Turn off then on 51.XX Error Turn off then on Description Recommended action The e-label for one of the print cartridges cannot be read or is missing. ● 10.0000 = black e-label error ● 10.0001 = cyan e-label error ● 10.0002 = magenta e-label error ● 10.0003 = yellow e-label error ● 10.1000 = black e-label is missing ● 10.1001 = cyan e-label is missing ● 10.1002 = magenta e-label is missing ● 10.1003 = yellow e-label is missing The printer experienced an internal error. 1. Reinstall the print cartridge. 2. Turn the printer off and then on. 3. If the problem is not solved, replace the cartridge. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If you are using a surge protector, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer. If the message persists, contact HP support. See Service and support. The printer has experienced an error with the Turn off the printer, wait at least 25 minutes, fuser. and then turn on the printer. If you are using a surge protector, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer. The printer has experienced an internal hardware error. If the message persists, contact HP support. See Service and support. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If you are using a surge protector, remove it. Plug the printer directly into the wall socket. Use the power switch to turn on the printer. ENWW Control-panel messages 89