HP Color LaserJet 8500 HP Color LaserJet 8500,8500 N, 8500 DN Printer - Gettin - Page 18

To connect to a 10Base2 network, To connect to a LocalTalk, network

Get HP Color LaserJet 8500 PDF manuals and user guides View all HP Color LaserJet 8500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

To connect to a 10Base2 network 1 Attach one section of the ThinLAN (coaxial) cable to a BNC "T" connector. 2 Attach another ThinLAN cable section (A) or, if it is at the end of the network, a 50-Ohm terminator (B) to the other side of the BNC "T" connector. 3 Plug the BNC "T" connector into the BNC port. To connect to a LocalTalk network Plug the end of the DIN-8 cable into the LocalTalk port. Note ThinLAN and DIN-8 cables, BNC "T" connectors, and 50-Ohm terminators are not included with the printer. They must be purchased separately. Note If you only use the LocalTalk port, EIO 1 INITIALIZING will appear every time you turn the printer on. The message should not interfere with normal printing through LocalTalk. If it does not clear within approximately five minutes, there is a problem with the print server or the network. To prevent the message from appearing during normal operation, connect a BNC "T" connector with two 50-Ohm terminators to the BNC port. 14 Step 4: Connecting the Printer to the Network EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
To connect to a 10Base2 network
1
Attach one section of the ThinLAN
(coaxial) cable to a BNC “T”
connector.
2
Attach another ThinLAN cable
section (A) or, if it is at the end of the
network, a 50-Ohm terminator (B) to
the other side of the BNC “T”
connector.
3
Plug the BNC “T” connector into the
BNC port.
To connect to a LocalTalk
network
Plug the end of the DIN-8 cable into the
LocalTalk port.
Note
ThinLAN and DIN-8 cables, BNC “T”
connectors, and 50-Ohm terminators are
not included with the printer. They must
be purchased separately.
Note
If you only use the LocalTalk port,
EIO
1 INITIALIZING
will appear every time
you turn the printer on. The message
should not interfere with normal printing
through LocalTalk. If it does not clear
within approximately five minutes, there
is a problem with the print server or the
network. To prevent the message from
appearing during normal operation,
connect a BNC “T” connector with two
50-Ohm terminators to the BNC port.
14
Step 4: Connecting the Printer to the Network
EN