HP Color LaserJet CM1015/CM1017 HP Color LaserJet CM1015/CM1017 MFP Series - U - Page 135

Paper handling Use the HP ToolboxFX paper-handling options to configure the default settings. These are the same options that are available on the System setup and Paper setup menus on the control panel. For more information, see Control-panel menus. Three options accommodate handling print jobs when the product is out of media: ● Select Wait for paper to be loaded. ● Select Cancel from the Paper out action drop-down list to cancel the print job. ● Select Override from the Paper out time drop-down list to send the print job to another paper tray. The Paper out time field specifies how long the MFP waits before acting on your selections. It is possible to specify from 0 to 3600 seconds. NOTE Click Apply to make the changes take effect. Print quality Use the HP ToolboxFX print-quality options to improve the print job appearance. These same options are available on the System setup and Print quality menu on the control panel. For more information, see Control-panel menus. These options control print quality. ● Color Calibration. ● Power On Calibration ● Calibration Timing ● Calibrate Now ● Grayscale Printing. Grayscale printing options Resolution REt Description Select 600 resolution for average print jobs and Fast Res 1200 for higher-quality print jobs. Select ProRes 1200 for the highest-quality print job, but a longer printing time. Choose REt which HP provides for improved print quality. NOTE Click Apply to make the changes take effect. Print density The print density settings control making fine adjustments to the density (amount) of Cyan, Magenta, Yellow, and Black toner in images, pages, and documents. Print density settings Contrasts Description Contrast is the density difference between light (highlight) and dark (shadow) colors. To increase the difference between light and dark colors (equivalent to a negative highlight adjustment ENWW Print: How do I? 121