HP D1520 Full User Guide - Page 97
Printouts seem blurry or fuzzy, Cause, Solution 3: Clean the print cartridges, Solution - review
UPC - 883585617685
View all HP D1520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 11 Always make sure the paper you are printing on is flat. For best results when printing images, use HP Premium Plus Photo Paper. For more information, see: Store and handle photo paper Cause: The wrong kind of paper was loaded in the input tray. If this did not solve the issue, try the next solution. Solution 3: Clean the print cartridges Solution: Check the estimated ink levels remaining in the print cartridges. NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable. If there is ink remaining in the print cartridges, but you are still noticing a problem, print a self-test report to determine if there is a problem with the print cartridges. If the self-test report shows a problem, clean the print cartridges. If the problem persists, you might need to replace the print cartridges. For more information, see Print a test page. Cause: The print cartridges needed to be cleaned or there was insufficient ink. Printouts seem blurry or fuzzy Try the following solutions if your printout is smudged or unclear. TIP: After reviewing the solutions in this section, you can go to HP's support Web site to see if there is additional troubleshooting help. For more information, go to: www.hp.com/support. • Solution 1: Check the print settings • Solution 2: Check the resolution of the image Solution 1: Check the print settings Solution: Check the print settings. • Check the paper type setting to make sure it matches the type of paper loaded in the input tray. • Check the quality setting. Use a higher quality setting to increase the amount of ink used for printing. For more information, see: • Select a paper type • Change the print speed or quality • Maximum dpi Cause: The paper type or print quality settings were incorrect. 94 Troubleshooting Troubleshooting