Home » HP Manuals » Desktops » HP Dc5850 » Manual Viewer

HP Dc5850 Broadcom NetXtreme Gigabit Ethernet Plus NIC - Page 13

twice to get back to the main

UPC - 884962022993

Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

7. Enter 4=xxx where xxx is the password to set a password. The password by default is blank. Figure 11 Management options 8. Enter 0 twice to get back to the main page. 9. Enter Q to Save and Exit. Figure 12 Save and exit After saving to NVRAM and exiting, the Administrator account along with the password has been created. 13

Section	Page
Broadcom NetXtreme Gigabit Ethernet Plus NIC	1
Introduction	2
Product Description	2
Figure 1 Broadcom NetXtreme Gigabit Ethernet Plus Network Adapter	2
Feature List	3
USB Cable and Headers	3
Supported Platforms	4
Platform	4
Network and Management Capability	4
Standard NIC	4
ASF	4
DASH	4
HP Compaq dc5850 Business PC	4
X	4
X	4
X	4
HP Compaq dc5800 Business PC	4
X	4
X	4
HP Compaq dc7800 Business PC	4
X	4
HP Compaq dc7900 Business PC	4
X	4
X	4
X	4
BIOS Requirements	4
System	4
BIOS Family	4
Revision	4
HP Compaq dc5850 Business PC	4
786F6	4
2.06	4
HP Compaq dc5800 Business PC	4
786F2	4
1.53	4
HP Compaq dc7800 Business PC	4
786F1	4
2.04	4
HP Compaq dc7900 Business PC	4
786G1	4
1.08	4
Selecting a Management Controller	5
F10 Setup Differences	5
F10 Setup - HP Compaq dc5850 Business PC	5
Figure 2 Management Devices in the HP Compaq dc5850 Business PC	5
Figure 3 Management Mode (DASH highlighted) in the HP Compaq dc5850 Business PC	6
F10 Setup - HP Compaq dc7900 Business PC	6
Figure 4 Management Controller in the HP Compaq dc7900 Business PC	7
Primary Management Controller	7
Management Module	7
Intel ME	7
AMT, ASF, None	7
Broadcom MC	7
DASH, ASF	7
Figure 5 Management Mode (DASH highlighted) in the HP Compaq dc7900 Business PC	8
Limitations	8
Drivers	8
Manageability Feature Enabling	9
DASH Enabling	9
1. Download the Broadcom NetXtreme Gigabit Drivers for Multiple Operating Systems Softpaq from www.hp.com.	9
2. Install the Softpaq.	9
3. Open a Command box as Administrator.	9
4. Go to the directory where the Broadcom application is installed.	9
5. Run bmcc enable.	9
1. Execute BACs.	9
2. Choose the Broadcom NetXtreme Gigabit Ethernet Plus network adapter.	9
Figure 6 Broadcom NetXtreme Gigabit Ethernet Plus network adapter - Information tab	10
3. Go to the Configuration tab.	10
4. Expand the OOB Management list to determine if DASH is enabled or disabled. By default DASH is disabled.	10
Figure 7 OOB Management list	10
5. Enable DASH and click the Apply button.	10
Figure 8 Enabling DASH	11
ASF Enabling	11
Setting Up Initial Administrator Account for DASH	11
1. Go to the directory where the Broadcom application is installed.	11
2. Run bmcc edit. This will execute the Broadcom Manageability Configuration and Control applica tion and will bring up a list of Management Firmware Configuration options.	11
Figure 9 Management Firmware Configuration options	12
3. Enter U for User Account Management.	12
4. Enter 2 for User Accounts.	12
5. Enter 1 for Administrator Account.	12
Figure 10 Management options	12
6. Enter 2 to change Offline from True to False.	12
7. Enter 4=xxx where xxx is the password to set a password. The password by default is blank.	13
Figure 11 Management options	13
8. Enter 0 twice to get back to the main page.	13
9. Enter Q to Save and Exit.	13
Figure 12 Save and exit	13
WebGUI	14
Connecting with the WebGUI:	14
1. Execute a web browser from a separate system - a management system that is also on the same sub net as the DASH system.	14
2. Connect to the IP address and port of the DASH system.	14
3. The management system makes a TCP connection to the DASH system and accesses the top level embedded web page.	14
Figure 13 Logon screen	15