HP Dc5850 Broadcom NetXtreme Gigabit Ethernet Plus NIC - Page 5
Selecting a Management Controller, F10 Setup Differences, F10 Setup - HP Compaq dc5850 Business PC - manual
UPC - 884962022993
View all HP Dc5850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Selecting a Management Controller For the dc5850 and 7900, the on-board network adapter is by default the primary management controller. For systems supporting the full management capabilities, the user will have to manually set the Broadcom NetXtreme Gigabit Ethernet Plus as the primary management controller in F10 Setup for it to control DASH manageability. Multiple network adapters can function simultaneously, but only one Management Controller can be active at a given time. The primary Management Controller can be set through: F10 Setup > Advanced > Manageability Devices. F10 Setup Differences The F10 Setup screens relating to the Management Devices and modes differ slightly between the HP Compaq dc5850 and 7900 Business PCs. F10 Setup - HP Compaq dc5850 Business PC The current Management Controller: F10 Setup > Advanced > Manageability Devices. By default, the embedded Broadcom Ethernet controller is primary management controller. The Broadcom NetXtreme Gigabit Ethernet Plus needs to be changed to primary management controller for DASH to be enabled. Figure 2 Management Devices in the HP Compaq dc5850 Business PC 5