HP Dc7900 Hardware Reference Guide - dc7900 Series Convertible Minitower - Page 47
Replacing the Thermal Sensor, Replacing the Security Screws
UPC - 884962028483
View all HP Dc7900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
7. Replace the four screws in the bottom of the carrier to hold the drive securely in place. Figure 2-36 Replacing the Security Screws 8. Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2). Figure 2-37 Replacing the Thermal Sensor ENWW Installing Additional Drives 41
7.
Replace the four screws in the bottom of the carrier to hold the drive securely in place.
Figure 2-36
Replacing the Security Screws
8.
Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and
attach the thermal sensor to the top of the hard drive with the adhesive strip (2).
Figure 2-37
Replacing the Thermal Sensor
ENWW
Installing Additional Drives
41