HP Designjet 10000s HP Designjet 10000 Series - Dryer Document - Page 23
When room temperature is low, Paper setting with or without the take-up-reel unit
View all HP Designjet 10000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
How to use the dryer When room temperature is low Always turn on the heater to keep air from the dryer at room temperature +10 to 20 °C. Raising the temperature to a certain level is required to dry the printed paper. Room temperature should be kept at 20 °C or more to increase drying efficiency. Paper setting with or without the take-up-reel unit Paper settings with or without the take-up-reel unit are shown below. ● With take-up-reel unit: Determine the location relative to the dryer as shown in the figure below. ● Without take-up-reel unit: Pull out the paper through the legs of the dryer as shown in the figure below. NOTE Avoid pulling out the paper too much as the printed surface may touch the dryer. ENWW Efficient use of the dryer 17
When room temperature is low
Always turn on the heater to keep air from the dryer at room temperature +10 to 20 °C. Raising the
temperature to a certain level is required to dry the printed paper. Room temperature should be kept at
20 °C or more to increase drying efficiency.
Paper setting with or without the take-up-reel unit
Paper settings with or without the take-up-reel unit are shown below.
●
With take-up-reel unit:
Determine the location relative to the dryer as shown in the figure below.
●
Without take-up-reel unit:
Pull out the paper through the legs of the dryer as shown in the figure below.
NOTE
Avoid pulling out the paper too much as the printed surface may touch the dryer.
ENWW
Efficient use of the dryer
17
How to use the dryer