HP Designjet L65500 HP Designjet L65500 Printer series - Installation Guide (E - Page 43

Purge and Setup Menu, Force, Normal Boot, At this point

Get HP Designjet L65500 PDF manuals and user guides View all HP Designjet L65500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Purge the ink system 10. The front panel prompts you to confirm that ink has reached the air purgers. Look at the air purgers and confirm that each color arrived to the air purger. 11. If ink did not reach one of the air purgers, use a syringe to complete the operation. For instructions, see Use a syringe to purge the tubes from the ISM to the printheads on page 40. 12. Wear gloves and use a cloth to remove the air purgers. Some ink may spill. When you are finished removing the air purgers, press OK to finish. 13. At this point, check to make sure that the ink leakage sensor is correctly placed at the bottom of the tray (it should be touching the tray). 14. From the front panel, enter the diagnostic menu and select Purge and Setup Menu > Force Normal Boot . ENWW 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
10.
The front panel prompts you to confirm that ink has reached the air purgers. Look at the air purgers
and confirm that each color arrived to the air purger.
11.
If ink did not reach one of the air purgers, use a syringe to complete the operation. For instructions,
see
Use a syringe to purge the tubes from the ISM to the printheads
on page
40
.
12.
Wear gloves and use a cloth to remove the air purgers. Some ink may spill. When you are finished
removing the air purgers, press
OK
to finish.
13.
At this point, check to make sure that the ink leakage sensor is correctly placed at the bottom of
the tray (it should be touching the tray).
14.
From the front panel, enter the diagnostic menu and select
Purge and Setup Menu
>
Force
Normal Boot
.
ENWW
39
Purge the ink system