HP Deskjet 340 HP DeskJet 340 Printer - (English) User's Guide - Page 6

Getting Started Installing the Portable Sheet Feeder To install the portable sheet feeder: 1 Insert the two catches near the bottom of the sheet feeder into the corresponding slots near the bottom of the printer face. 2 Now rotate the top edge of the sheet feeder toward the printer and press the two units together. You will hear a click as the sheet feeder latches onto the printer. 3 Stand the printer upright on a firm surface, such as a desk or table. Loading Paper To load paper in the portable sheet feeder: 1 Using the recess at the top center of the sheet feeder, open the unit gently until you hear a click. 2 Rotate each of the paper support arms until both point upwards. 4 3 Push the paper release lever 3 down to the open position. 4 Slide the left paper width adjustment guide to the side of the sheet feeder. 4 5 Now insert paper in the sheet feeder. Move the left paper width adjustment guide against the paper. 5 The guide clicks into position for U.S. Letter, U.S. Legal, U.S. Executive, or A4. 6 Finally, push the paper release lever up to press the paper 6 against the rollers. The paper is now ready for printing. Notes on loading paper • Load paper with the side to print facing up. • Use only one paper type at a time. • The number of sheets that you should load depends on the weight of the paper: Paper Weight Number of Sheets 24 lb. (90 g/m2) 20 20 lb (75 g/m2) 25 16 lb (60 g/m2) 30