HP Dv2 1030us HP Pavilion dv2 Entertainment PC - Maintenance and Service Guide - Page 72

LED board, Hard drive see

Get HP Dv2 1030us - Pavilion Entertainment - Athlon Neo 1.6 GHz PDF manuals and user guides
UPC - 884420990550
View all HP Dv2 1030us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

2. Remove the speaker assembly (2). Reverse this procedure to install the speaker assembly. LED board NOTE: The LED board is included with the base enclosure. For information on the base enclosure with a UMA heat sink, see spare part number 517752-001. For information on the base enclosure with a discrete heat sink, see spare part number 517753-001. Before removing the LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Hard drive (see Hard drive on page 40) b. Memory module (see Memory module on page 43) c. WWAN module (see WWAN module on page 45) d. WLAN module (see WLAN module on page 47) e. Keyboard (see Keyboard on page 50) f. Top cover (see Top cover on page 53) g. Fan (see Fan on page 55) 64 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
2.
Remove the speaker assembly
(2)
.
Reverse this procedure to install the speaker assembly.
LED board
NOTE:
The LED board is included with the base enclosure. For information on the base enclosure
with a UMA heat sink, see spare part number 517752-001. For information on the base enclosure with
a discrete heat sink, see spare part number 517753-001.
Before removing the LED board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
39
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
40
)
b.
Memory module (see
Memory module
on page
43
)
c.
WWAN module (see
WWAN module
on page
45
)
d.
WLAN module (see
WLAN module
on page
47
)
e.
Keyboard (see
Keyboard
on page
50
)
f.
Top cover (see
Top cover
on page
53
)
g.
Fan (see
Fan
on page
55
)
64
Chapter 4
Removal and replacement procedures