HP EK430AA User's Guide - HP Plasma HDTV - Page 50
Using the System Menu, Starting the Setup Wizard, Returning to Default Settings, Using White Wash,
View all HP EK430AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using the System Menu Use the System menu to select the language for the OSD menus, find the software version, start the Setup Wizard, return OSD settings to default values, select the Standby Mode, and start White Wash to reduce the appearance of afterimage. System menu OSD Software Version Setup Wizard Default Settings White Wash Standby Mode Options ■ Language: English/ French/Spanish ■ OSD timeout: Short/ Middle/Long Shows TV software version number Start the setup wizard: Yes/No Press OK to recover all settings to default values. ■ Yes/No ■ Low power ■ Fast power Starting the Setup Wizard In the Setup Wizard menu, choose Yes, and press OK. Then, turn off the TV, and turn it on again to start the Setup Wizard. Returning to Default Settings In the Default Settings menu, return all settings, including the channel list, to default value by selecting Default Settings, and then pressing OK. Using White Wash In the White Wash menu, select Yes and press OK to display an all-white screen for 3 minutes. This can reduce the appearance of an afterimage resulting from a fixed screen image. n Extensive use of White Wash may reduce the lifetime of the panel. Selecting the Standby Mode (Power Control) The Standby Mode menu setting can save energy. The setting determines the power used by the TV when it is turned off and enters standby. ■ Low power: Consumes less power while in standby, uses approximately 20 seconds of power-up time. ■ Fast power: Consumes more power while in standby, uses approximately 5 seconds of powerup time. 40 HP Plasma HDTV User's Guide