HP ENVY Notebook - m7-k111dx HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP - Page 75
USB board, Disconnect the USB cable from the ZIF connector
View all HP ENVY Notebook - m7-k111dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
USB board Description USB board for use with HP ENVY 17 Notebook PC computer models USB board for use with HP ENVY 15 Notebook PC computer models Spare part number 763709-001 763786-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the optical drive (see Optical drive on page 43). 6. Remove the base enclosure and top cover (see Base enclosure on page 46). Remove the USB board and cables: 1. Disconnect the USB cable from the ZIF connector (1). 2. Remove the Phillips screw securing the USB board (2), and lift the USB board (3) to remove it. Reverse this procedure to install the USB board and cables. Component replacement procedures 65