HP ENVY Notebook - m7-k111dx HP ENVY 17 Notebook PC HP ENVY 15 Notebook PC HP - Page 81
Solid State Drive, Remove the solid-state drive
View all HP ENVY Notebook - m7-k111dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Reverse this procedure to install the system board. Solid State Drive Description 256 GB mSATA solid-state drive MLC (not pictured) available on select models 256 GB mSATA solid-state drive TLC (not pictured) Spare part number 766593-001 766594-001 Before removing the speakers, follow these steps: Before removing the Speakers, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), 5. Remove the optical drive (see Optical drive on page 43). 6. Remove the top cover from the base enclosure (see Base enclosure on page 46). 7. Remove the WLAN module (see WLAN module on page 59). 8. Remove the subwoofer (see Subwoofer on page 63). 9. Remove the system board (see System board on page 67). Remove the solid-state drive: 1. Turn the system board updside down. 2. Remove the Phillips.screw (1) that secures the solid-state drive to the system board. (The solid- state drive tilts up). Component replacement procedures 71