HP ENVY m4-1115dx HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 43

Optical drive, Remove the Phillips PM2.0×5.5 screw

Get HP ENVY m4-1115dx PDF manuals and user guides View all HP ENVY m4-1115dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Optical drive Description DVD±RW Double-Layer with SuperMulti Drive (includes optical drive bezel and optical drive bracket) Spare part number 698085-001 Before removing the optical drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery). 5. Remove the service cover (see Hard drive). Remove the optical drive: 1. Remove the Phillips PM2.0×5.5 screw (1) that secures the optical drive to the computer. 2. Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab (2) to release the optical drive. 3. Remove the optical drive (3) from the computer. Reverse this procedure to install the optical drive. Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Optical drive
Description
Spare part number
DVD±RW Double-Layer with SuperMulti Drive (includes optical drive bezel and optical
drive bracket)
698085-001
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
).
5.
Remove the service cover (see
Hard drive
).
Remove the optical drive:
1.
Remove the Phillips PM2.0×5.5 screw
(1)
that secures the optical drive to the computer.
2.
Use a flat-blade screw driver or similar tool to press on the optical drive bracket tab
(2)
to
release the optical drive.
3.
Remove the optical drive
(3)
from the computer.
Reverse this procedure to install the optical drive.
Component replacement procedures
35