HP ENVY m4-1115dx HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 54

Remove the Phillips PM2.0×2.0 screws in the optical drive bay, top cover.

Get HP ENVY m4-1115dx PDF manuals and user guides View all HP ENVY m4-1115dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

NOTE: When replacing the top cover, be sure that the fingerprint reader board (see Fingerprint reader board) and TouchPad button board (see TouchPad button board) are removed from the defective top cover and installed on the replacement top cover. Remove the top cover: 1. Remove the two rear rubber feet (1). The two rear rubber feet are included in the Rubber Kit, spare part number 698089-001. 2. Remove the eight Phillips PM2.5×6.5 screws (2) that secure the display assembly to the top cover. 3. Remove the Phillips PM2.0×2.0 screws in the optical drive bay (1) and the hard drive bay (2). 4. Turn the computer right side up, with the front toward you. 5. Open the computer. 46 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
NOTE:
When replacing the top cover, be sure that the fingerprint reader board (see
Fingerprint
reader board
) and TouchPad button board (see
TouchPad button board
) are removed from the
defective top cover and installed on the replacement top cover.
Remove the top cover:
1.
Remove the two rear rubber feet
(1)
.
The two rear rubber feet are included in the Rubber Kit, spare part number 698089-001.
2.
Remove the eight Phillips PM2.5×6.5 screws
(2)
that secure the display assembly to the
top cover.
3.
Remove the Phillips PM2.0×2.0 screws in the optical drive bay
(1)
and the hard drive bay
(2)
.
4.
Turn the computer right side up, with the front toward you.
5.
Open the computer.
46
Chapter 4
Removal and replacement procedures