HP ENVY m6-aq000 Maintenance and Service Guide - Page 40
RTC battery, Use a case utility tool
View all HP ENVY m6-aq000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
RTC battery Description RTC battery Spare part number 616073-001 Before removing the TouchPad cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). 5. Remove the battery (see Battery on page 29). Remove the RTC battery: ▲ Use a case utility tool (1) or similar plastic, flat-edged tool to release the RTC battery (2) from its slot on the system board. Reverse this procedure to install the RTC battery. When installing the RTC battery, make sure the "+" sign is facing up. 32 Chapter 5 Removal and replacement procedures