HP ENVY m6-aq000 Maintenance and Service Guide - Page 47

Fan/heat sink assembly, that secure the fan/heat sink assembly

Get HP ENVY m6-aq000 PDF manuals and user guides View all HP ENVY m6-aq000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Fan/heat sink assembly Description Fan/heat sink assembly (includes replacement thermal material) Spare part number 856277-001 Before removing the fan/heat sink assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). 5. Disconnect the battery cable from the system board (see Battery on page 29). Remove the fan/heat sink assembly: 1. Disconnect the fan cable (1) from the system board. 2. Release the display panel cable (2) from the retention clips and channel built into the fan. 3. Loosen the four Phillips PM2.0×6.2 captive screws (3) that secure the fan/heat sink assembly to the system board. 4. Remove the three Phillips PM2.0×4.6 screws (4) that secure the fan to the keyboard/top cover. 5. Remove the fan/heat sink assembly (5). NOTE: It is necessary to detach the fan/heat sink assembly from the connector board cable (6) when removing the fan/heat sink assembly. The fan/heat sink assembly is attached to the connector board cable with double-sided adhesive. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Fan/heat sink assembly
Description
Spare part number
Fan/heat sink assembly (includes replacement thermal material)
856277-001
Before removing the fan/heat sink assembly, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
27
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
29
).
Remove the fan/heat sink assembly:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Release the display panel cable
(2)
from the retention clips and channel built into the fan.
3.
Loosen the four Phillips PM2.0×6.2 captive screws
(3)
that secure the fan/heat sink assembly to
the system board.
4.
Remove the three Phillips PM2.0×4.6 screws
(4)
that secure the fan to the keyboard/top cover.
5.
Remove the fan/heat sink assembly
(5)
.
NOTE:
It is necessary to detach the fan/heat sink assembly from the connector board cable
(6)
when
removing the fan/heat sink assembly. The fan/heat sink assembly is attached to the connector board
cable with double-sided adhesive.
Component replacement procedures
39