HP ENVY m6-aq000 Maintenance and Service Guide - Page 60
that secures the display panel cable to the display back cover.
View all HP ENVY m6-aq000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
d. Remove the webcam/microphone module (3). The webcam/microphone module is available using spare part numbers 845361-001 (3D webcam/ microphone module) and 833962-005 (non-3D webcam/microphone module). 9. If it is necessary to replace the display panel cable: NOTE: The display panel cable includes the webcam/microphone module cable. a. Remove the display panel assembly. b. Disconnect the webcam/microphone module cable (1) from the webcam/microphone module. c. Release the pieces of tape (2) that secure the display panel cable to the display back cover. d. Release the grounding foil (3) that secures the display panel cable to the display back cover. e. Release the display panel cable from the routing clips (4) and channels built into the top, left, and bottom edges of the display back cover. f. Remove the display panel cable (5). The display panel cable is available using the following spare part numbers: ● 856807-001 - For use only on computer models equipped with a UHD display panel and a 3D webcam ● 856806-001 - For use only on computer models equipped with a UHD display panel and a non-3D webcam ● 856805-001 - For use only on computer models equipped with an FHD display panel and a 3D webcam ● 856804-001 - For use only on computer models equipped with an FHD display panel and a non-3D webcam 52 Chapter 5 Removal and replacement procedures