HP ENVY m6-aq100 Maintenance and Service Guide - Page 37
Battery, Release the battery cable from the retention clip
View all HP ENVY m6-aq100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Battery Description 4-cell, 55-Wh, 3.62-Ah, Li-ion battery (includes cable) Spare part number 844204-855 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Bottom cover on page 27). Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Release the battery cable from the retention clip (2) built into the keyboard/top cover. 3. Remove the six Phillips M2.0×4.6 screws (3) that secure the battery to the keyboard/top cover. 4. Remove the battery (4). Reverse this procedure to install the battery. Component replacement procedures 29