HP ENVY m6-aq100 Maintenance and Service Guide - Page 43
Memory module, Remove the memory module
View all HP ENVY m6-aq100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Memory module Description 8-TB (2133, 1.2-V, DDR4) 4-TB (2133, 1.2-V, DDR4) 2-TB (2133, 1.2-V, DDR4) Spare part number 820570-005 820569-005 851379-005 Before removing a memory module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). 5. Disconnect the battery cable from the system board (see Battery on page 29). Remove the memory module: 1. Remove the memory module shield that covers the memory module slots. The memory module shield is available using spare part number 856815-001. 2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) Component replacement procedures 35