HP ENVY m6-aq100 Maintenance and Service Guide - Page 41
TouchPad cable, the TouchPad cable from the TouchPad board.
View all HP ENVY m6-aq100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
TouchPad cable Description TouchPad cable (includes double-sided adhesive) Spare part number 856802-001 Before removing the TouchPad cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 27). 5. Remove the battery (see Battery on page 29). Remove the TouchPad cable: 1. Release the ZIF connector (1) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Release the ZIF connector (2) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the TouchPad board. 3. Detach the TouchPad cable (3) from the keyboard/top cover. (The TouchPad cable is secured to the keyboard/top cover with double-sided adhesive.) 4. Remove the TouchPad cable. Reverse this procedure to install the TouchPad cable. Component replacement procedures 33