HP ENVY m6-ar000 Maintenance and Service Guide - Page 49
Display assembly, Phillips PM2.5×4.5 screws
View all HP ENVY m6-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3. Remove the system board (4). Reverse this procedure to install the system board. Display assembly NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 24), and then removed the following components: a. Battery (see Battery on page 26). b. Fan/heat sink assembly (see Fan/heat sink assembly on page 35). c. System board (see System board on page 39). Remove the display assembly: 1. Remove the five Phillips PM2.5×4.5 screws (1) that secure the display assembly to the keyboard/ top cover. Component replacement procedures 41