HP ENVY m6-ar000 Maintenance and Service Guide - Page 54
Detach the webcam/microphone module, Remove the display panel assembly.
View all HP ENVY m6-ar000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
e. Detach the G-sensor board (3) from the display back cover. The G-sensor board is secured to the display back cover with double-sided adhesive.) f. Remove the G-sensor board. The G-sensor board is available using spare part number 856790-001. 8. If it is necessary to replace the webcam/microphone module: a. Remove the display panel assembly. b. Detach the webcam/microphone module (1) from the display back cover. The webcam/microphone module is secured to the display back cover with double-sided adhesive.) c. Disconnect the webcam/microphone module cable (2) from the webcam/microphone module. 46 Chapter 5 Removal and replacement procedures
e.
Detach the G-sensor board
(3)
from the display back cover. The G-sensor board is secured to
the display back cover with double-sided adhesive.)
f.
Remove the G-sensor board.
The G-sensor board is available using spare part number 856790-001.
8.
If it is necessary to replace the webcam/microphone module:
a.
Remove the display panel assembly.
b.
Detach the webcam/microphone module
(1)
from the display back cover. The webcam/microphone
module is secured to the display back cover with double-sided adhesive.)
c.
Disconnect the webcam/microphone module cable
(2)
from the webcam/microphone module.
46
Chapter 5
Removal and replacement procedures