HP EliteBook Folio G1 Maintenance and Service Guide - Page 33

Battery, Remove the two Phillips PM1.6×4.0 screws

Get HP EliteBook Folio G1 PDF manuals and user guides View all HP EliteBook Folio G1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Battery Description 4-cell, 38-Wh, 1.89-Ah, Li ion battery Spare part number 828226-005 Before disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). Remove the battery: 1. Disconnect the battery cable from the system board (1). 2. Remove the two Phillips PM1.6×4.0 screws (2) that secure the battery to the computer. 3. Remove the six Phillips PM2.0×3.0 screws (3) that secure the battery to the computer. 4. Lift the battery out of the computer (4). Reverse this procedure to install the battery drive. Component replacement procedures 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Battery
Description
Spare part number
4-cell, 38-Wh, 1.89-Ah, Li ion battery
828226-005
Before disassembling the computer, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
Remove the battery:
1.
Disconnect the battery cable from the system board
(1)
.
2.
Remove the two Phillips PM1.6×4.0 screws
(2)
that secure the battery to the computer.
3.
Remove the six Phillips PM2.0×3.0 screws
(3)
that secure the battery to the computer.
4.
Lift the battery out of the computer
(4)
.
Reverse this procedure to install the battery drive.
Component replacement procedures
25