HP EliteBook Folio G1 Maintenance and Service Guide - Page 38
System board, Disconnect the following cables
View all HP EliteBook Folio G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
System board NOTE: The system board spare part kit includes a processor, heat sink, 8 GB of system RAM, and replacement thermal material. All system boards use the following part numbers: xxxxxx-001: Windows 7 or non-Windows operating systems xxxxxx-601: Windows 10 operating system Description Equipped with Intel Core m7-6Y75 processor Equipped with Intel Core m5-6Y57 processor Equipped with Intel Core m5-6Y54 processor Equipped with Intel Core m3-6Y30 processor Spare part number 850910-xxx 850909-xxx 850908-xxx 866191-xxx Before removing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Remove the battery (see Battery on page 25). 6. When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● SSD drive module (see SSD drive on page 26) Remove the system board: 1. Disconnect the following cables: (1): WLAN antennas (2): Webcam cable (3): Keyboard backlight cable (4): TouchPad cable (5): Display panel cable (6): Keyboard cable (primary) (7): Audio board cable (8): Speaker cable 30 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts