HP EliteBook Folio G1 Maintenance and Service Guide - Page 35
Speaker assembly, Lift the tape that secures the cable to the computer
View all HP EliteBook Folio G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Speaker assembly Description Speaker assembly (includes cable) Spare part number 850906-001 Before removing the speaker assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery cable (see Battery on page 25). Remove the speaker assembly: 1. Disconnect the speaker cable from the system board (1). 2. Lift the tape that secures the cable to the computer (2). 3. Remove the six Phillips PM2.0×3.0 screws (3) that secure the speakers to the computer. 4. Remove the speakers from the computer (4). Reverse this procedure to install the speakers. Component replacement procedures 27