HP EliteDesk 800 G1 Ultra-slim PC Business Notebook and Desktop PC F10 setup o - Page 10

Feature  USB Charging Port  Secondary Battery Fast Charge  Virtualization Technology  Virtualization Technology for Directed I/O  TXT Technology  Multi Core CPU  Intel HT Technology  NumLock on at boot  Hybrid Graphics  Hybrid Graphics Enhanced Display Feature  Max SATA Speed  Ctrl I Prompt  HP HV Secure Boot  HP HV Secure Version Control  HP HV Secure Boot Configuration Lockdown  Intel Rapid Start Technology  Entry on S3 RTC wake  S3 Wake Timer  Entry on S3 Critical Battery wake event  Express Card Link Speed Function Default setting, if applicable Allows an external device to charge until a specified battery charge level is reached Enabled, 10% Stops charging the primary battery at 90% and begins charging a secondary battery to optimize the charge cycle Enabled Enables VT on Intel-based systems - a feature that is often used to run Disabled virtual machines Grants virtual machines direct access to peripheral devices on select Intel platforms Disabled Enables Trusted Execution Technology on select Intel platforms, a feature that defends against software-based attacks on sensitive information stored on the system Disabled Enables dual/quad processor cores Enabled Enables Hyper-Threading on select Intel-based systems Enabled Enables Number Lock at boot Disabled Enable / Disable or allow BIOS to automatically enable / disable Hybrid Graphics based on OS (when set to Auto). When set to Auto, Hybrid Graphics is disabled for certain Linux OS. When set to Disable, only the integrated graphics adapter is used on selected platform. On Workstation, only the discrete graphics adapter is used. When set to Enable, both the integrated and discrete graphics adapters are used. Enabled (Auto on Workstation) Enable additional display capability to allow pre-OS applications to be visible on any one of the available display at boot. When disabled, pre-OS applications can only be visible on certain displays (Internal Panel, VGA, System Display Port on selected platforms) at boot. Digital displays attached to dock will not support pre-OS applications. Enabled Selects the maximum SATA port speed between SATA II (3.0 Gbps) or SATA III (6.0 Gbps) 3.0 Gbps / 6.0 Gbps Enables the Ctrl +I Prompt, which allows the user to enter the RAID Configuration Utility Disabled Enables the HP Hypervisor, which allows multiple operating systems to Disabled run concurrently and share the system hardware Enables BIOS to check the specific version of the HP Hypervisor package against the allowed version stored in BIOS Note: The platform only boots to the default boot loader configuration file that is distributed with the target HP Hypervisor package. Disabled Enables the hypervisor to verify its current configuration against a saved setting Disabled Enables Intel Rapid Start Technology, which improves battery life and system resume time above current Standby and Hibernate levels. Note: This feature only works when an SSD is detected. Currently, it is only supported in mSATA SSD-based solutions. Disabled Enables RTC wake to trigger the transition from S3 to Intel Rapid Start Disabled Technology Specifies the length of time the system remains in S3 before an RTC wake event is triggered 5 minutes Enables critical battery event support on Intel Rapid Start Technology; Disabled wakes the system to provide an alert that the battery-level is low Sets speed for Express Card Link. Generation 1 will set the Link Speed to max 2.5 Gbit/s and Generation 2 will set the Link Speed to a maximum of 5.0 Gbit/s Generation 2 Reboot required Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 10