HP EliteDesk 800 G1 Ultra-slim PC Business Notebook and Desktop PC F10 setup o - Page 17

, Feature Function  Option ROM Prompt  After Power Loss  POST Delay (in seconds)  Remote Wakeup Boot Source  Factory Recovery Boot Support  Bypass F1 Prompt on Configuration Changes BIOS Power-on Onboard Devices Displays the Option ROM prompt on POST screen Specifies system state after power loss Specifies amount of delay to add during POST for certain peripherals Specifies boot device after a remote wakeup event Enables BIOS support for HP Backup and Recovery tools Allows system to boot without user input after configuration change (for example, memory size) Specifies time and day(s) when system automatically wakes from the S5 (off) state Specifies a Legacy Device's IRQ, DMA, and I/O Range settings Bus Options  PCI SERR# Generation Enables PCI device to generate SERR# (System Error), as defined by the PCI specification  PCI VGA Palette Snooping Enables VGA palette registers snooping Device Options - All-in-One (AIO) systems  Turbo Mode Enables processor feature that optimizes core frequencies can be optimized for performance based on the load on each core  Num Lock State at Power-on Enables Number Lock at boot  LVDS Panel Select Enables panel type/vendor selection override  Internal Speaker Enables or disables the internal speaker  USB EHCI Port Debug Forces all USB ports to use USB 2 for debugging utilities and other applications that do not support USB 3  Multi-processor Enables BIOS to report multiple processor cores to the OS  Hyperthreading9 Enables hyperthreading capability on Intel processors; some programs may run better with this feature disabled.  USB Charging Port The top left-side USB port on AIO systems can be used to charge USB devices when the system is powered off. Device Options - Other systems  Turbo Mode Enables processor feature that optimizes core frequencies can be optimized for performance based on the load on each core  Num Lock State at Power-on Enables Num Lock at boot  Integrated Video Enables integrated video controller  Internal Speaker Enables or disables the internal speaker  USB EHCI Port Debug Forces all USB ports to use USB 2 for debugging utilities and other applications that do not support USB 3  Multi-processor Enables BIOS to report multiple processor cores to the OS Default setting, if applicable Enabled Off None Local Hard Drive Disabled Disabled Disabled Serial Port A: IO=3F8h, IRQ=4 Parallel Port: IO=378h, IRQ=7, DMA=1 Printer Mode: EPP+ECP Enabled Disabled Enabled Off Automatic Enabled Disabled Enabled Enabled Enabled Enabled Off Enabled Enabled Disabled Enabled Reboot required Yes Yes Yes No Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 9 Intel HT Technology (HT) is designed to improve performance of multi-threaded software products and requires a computer system with a processor supporting HT and an HT-enabled chipset, BIOS and OS. Please contact your software provider to determine compatibility. Not all customers or software applications will benefit from the use of HT. See http://www.intel.com/info/hyperthreading for more information. 17