HP EliteDesk 800 G3 Hardware Reference Guide - Page 21
possible between Channel A and Channel B., Replace the computer access panel.
![]() |
View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6. Open both latches of the memory module socket (1), and insert the memory module into the socket (2). Press the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. Populate the black DIMM sockets before the white DIMM sockets. For maximum performance, populate the sockets so that the memory capacity is spread as equally as possible between Channel A and Channel B. 7. Repeat step 6 to install any additional modules. 8. Replace the computer access panel. 9. Reconnect the power cord and any external devices, and then turn on the computer. The computer should automatically recognize the additional memory. 10. Lock any security devices that were disengaged when the access panel was removed. Upgrading system memory 15
![](/manual_guide/products/hewlettpackard-elitedesk-800-g3-hardware-reference-guide-66945e1/21.png)