HP EliteDesk 800 G3 Hardware Reference Guide - Page 26

the front of the cage down into the slots, and then slide the cage forward 1. Then press the rear

Get HP EliteDesk 800 G3 PDF manuals and user guides View all HP EliteDesk 800 G3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

c. To install a full-length expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bottom of the bracket on the card slides into the small slot on the chassis. Press the card straight down into the expansion socket on the system board (2). d. Replace the drive cage. Align the rivets on the front of the cage with the slots on the chassis, press the front of the cage down into the slots, and then slide the cage forward (1). Then press the rear of the cage down (2) so that the drive lock mechanism latches onto the drive cage (3). e. Connect the power and data cables to the rear of the drives in the hard drive cage. 20 Chapter 2 Hardware upgrades

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
c.
To install a full-length expansion card, hold the card just above the expansion socket on the
system board then move the card toward the rear of the chassis (1) so that the bottom of the
bracket on the card slides into the small slot on the chassis. Press the card straight down into the
expansion socket on the system board (2).
d.
Replace the drive cage. Align the rivets on the front of the cage with the slots on the chassis, press
the front of the cage down into the slots, and then slide the cage forward (1). Then press the rear
of the cage down (2) so that the drive lock mechanism latches onto the drive cage (3).
e.
Connect the power and data cables to the rear of the drives in the hard drive cage.
20
Chapter 2
Hardware upgrades