HP EliteDesk 800 Hardware Reference Guide - Page 36
Lock any security devices that were disengaged when the computer access panel was removed.
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
12. Close the expansion card retention latch, making sure that it snaps firmly into place. 13. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 14. Replace the computer access panel. 15. Reconnect the power cord and turn on the computer. 16. Lock any security devices that were disengaged when the computer access panel was removed. 17. Reconfigure the computer, if necessary. 28 Chapter 2 Tower (TWR) hardware upgrades ENWW
12.
Close the expansion card retention latch, making sure that it snaps firmly into place.
13.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
14.
Replace the computer access panel.
15.
Reconnect the power cord and turn on the computer.
16.
Lock any security devices that were disengaged when the computer access panel was removed.
17.
Reconfigure the computer, if necessary.
28
Chapter 2
Tower (TWR) hardware upgrades
ENWW