HP EliteDesk 800 Hardware Reference Guide - Page 47
Replace the front bezel., Reconnect the power cord and any external devices
View all HP EliteDesk 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
8. Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place. 9. If installing a USB 3.0 media card reader, connect the USB cable from the media card reader to the USB 3.0 connector on the system board labeled MEDIA3.0. NOTE: Refer to System board connections on page 64 for an illustration of the system board drive connectors. 10. Replace the front bezel. 11. Replace the computer access panel. 12. Reconnect the power cord and any external devices, then turn on the computer. 13. Lock any security devices that were disengaged when the access panel was removed. ENWW Installing and removing drives 39
8.
Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until
the drive snaps into place.
9.
If installing a USB 3.0 media card reader, connect the USB cable from the media card reader to
the USB 3.0 connector on the system board labeled MEDIA3.0.
NOTE:
Refer to
System board connections
on page
64
for an illustration of the system board
drive connectors.
10.
Replace the front bezel.
11.
Replace the computer access panel.
12.
Reconnect the power cord and any external devices, then turn on the computer.
13.
Lock any security devices that were disengaged when the access panel was removed.
ENWW
Installing and removing drives
39