HP Envy 13-1000 HP ENVY 13 - Maintenance and Service Guide - Page 42
Speaker assembly, The mass storage device bracket is included in the Hard Drive Mounting Kit
View all HP Envy 13-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Speaker assembly Removal and replacement procedures Description Speaker assembly Spare part number 538342-001 Before removing the speaker assembly, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the top cover (see "Top cover" on page 4-8). Remove the speaker assembly: 1. Remove the Phillips PM1.5×3.0 screw 1 that secures the mass storage device bracket to the base enclosure. The mass storage device bracket is included in the Hard Drive Mounting Kit, spare part number 538330-001, and the Solid-state Drive Mounting Kit, spare part number 538331-001. 2. Release the mass storage device bracket 2 by lifting the right side of the bracket until it rests at an angle. 3. Remove the mass storage device bracket 3. Maintenance and Service Guide 4-13