HP Evo n410c Compaq Evo Notebook N410c Series and N410c Series Maintenance and - Page 119

Removing the Modem Cable on Evo Notebook, N410c Models, from the system board.

Page 119 highlights

Removal and Replacement Procedures 5. Position the notebook so the front faces you. ✎ Steps 6 through 11 apply only to Evo Notebook N410c models. 6. Lift the RJ45/RJ11 connector module 1 out of the base enclosure (Figure 5-26). 7. Disconnect the microphone cable 2 from the connector on the display lid switch board. 8. Disconnect the microphone cable 3 from the system board. 9. Remove the PM 2.0 × 5.0 screw 4 that secures the display lid switch board to the base enclosure. Figure 5-26. Removing the Modem Cable on Evo Notebook N410c Models 5-34 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172

5–34
Maintenance and Service Guide
Removal and Replacement Procedures
5. Position the notebook so the front faces you.
Steps 6 through 11 apply only to Evo Notebook N410c models.
6. Lift the RJ45/RJ11 connector module
1
out of the base
enclosure (Figure 5-26).
7. Disconnect the microphone cable
2
from the connector on
the display lid switch board.
8. Disconnect the microphone cable
3
from the system board.
9.
Remove the PM 2.0 × 5.0 screw
4
that secures the display lid
switch board to the base enclosure.
Figure 5-26. Removing the Modem Cable on Evo Notebook
N410c Models