HP Evo n410c Compaq Evo Notebook N410c Series and N410c Series Maintenance and - Page 125
Removing the System Board Screws, and Screwlocks, Remove the six TM2.0 × 4.0 screws
View all HP Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Removal and Replacement Procedures 7. Turn the base enclosure top side up with the rear panel facing forward. 8. Remove the TM2.0 × 6.0 screw 1 that secures the left display support to the base enclosure (Figure 5-31). ✎ The left display support is included in the Miscellaneous Plastics Kit (spare part number 231454-001). 9. Remove the left display support 2. 10. Remove the two HM5.0 × 9.0 screwlocks 3 that secure the external monitor connector to the base enclosure. 11. Remove the six TM2.0 × 4.0 screws 4 that secure the system board to the base enclosure. ✎ Evo Notebook N410c models have an additional TM2.0 × 3.5 screw 5 that must be removed. Figure 5-31. Removing the System Board Screws and Screwlocks 5-40 Maintenance and Service Guide
5–40
Maintenance and Service Guide
Removal and Replacement Procedures
7.
Turn the base enclosure top side up with the rear panel facing
forward.
8.
Remove the TM2.0 × 6.0 screw
1
that secures the left display
support to the base enclosure (Figure 5-31).
✎
The left display support is included in the Miscellaneous Plastics
Kit (spare part number 231454-001).
9. Remove the left display support
2
.
10. Remove the two HM5.0 × 9.0 screwlocks
3
that secure the
external monitor connector to the base enclosure.
11.
Remove the six TM2.0 × 4.0 screws
4
that secure the system
board to the base enclosure.
✎
Evo Notebook N410c models have an additional TM2.0 × 3.5
screw
5
that must be removed.
Figure 5-31. Removing the System Board Screws
and Screwlocks